| Frequency Range (-10dB) | - 53 Hz-19 kHz (array preset)
|
| Coverage Pattern | - 105 degrees nominal (400 Hz-16 kHz)
|
| Maximum SPL | |
| System Type | - Line Array, two-way active
|
| Amplifier Design | |
| Continuous Power RatingPower Rating Peak | - 600 Watts | LF: 400 Watts | HF: 200 Watts
|
| LF Driver | - (2) JBL 261G-1, 10 in diameter, dual 2.0 in diameter voice coil, neodymium Differential Drive
|
| HF Driver | - (1) JBL 2432H-3, 1.5 in exit neodymium compression driver with 3 in voice coil
|
| Enclosure | - Polypropylene, aluminum baffle, plywood internal bracing, four integral recessed handholds
|
| Inter-Enclosure Angles | - 0.5, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12
|
| Dimensions (H x W x D) | - 305 mm x 716 mm x 519 mm (12.0 in x 28.2 in x 20.5 in)
|
| Net Weight (each) | |
The SRX828SP is a powered portable subwoofer in the SRX800 series from JBL Professional. It has been designed to deliver class leading performance in a variety of applications including small and medium sized installations and tours. When used in conjunction with the SRX800 full range systems and other SRX800 subs, SRX828SP in an integral part of a high performance, fully configurable loudspeaker system.
With and M20 pole cup and indexed feet, the SRX828SP can be configured for a variety of applications, including being stacked in a cardioid configuration for large shows on stage.For incredible extended low frequency response, the SRX828SP uses an 18-inch woofer with JBLs patented Differential Drive Technology for reduced weight while maximizing power amp efficiency. 3 voice coils and dual ferrite drivers deliver exceptionally low distortion and extended low frequency response.
The SRX828SP features a full suite of onboard user configurable DSP including 20 PEQs, 2 seconds of delay, signal generators, input mixing, amplifier monitoring, and 50 slots for recallable presets, including several JBL-engineered application presets. In addition, the system is compatible with V5 JBL Tunings, and features 96kHz FIR Filters, and LevelMax Limiting providing compatibility with our flagship Vertec and VTX touring systems.
System control and networking is provided by Audio Architect, and a standalone application for iOS and Android. Simple wired control is provided via an Ethercon connector on the back of the system and wireless control is possible using a standard off the shelf wireless router.
